Assembling, part Tres

Next, line up the side edges of the back with the back edges of the sides. You'll have to fold the top panel outward a bit into a triangle to line up the side all the way to the top. Make sure to sew all the way over the corner. This makes his corners a little messy, as they get sewn one way before the other, but you don't want him to have holes in the corners!!

Finally, pin the bottom edge of the back along the back edge of the bottom, again being careful at the corners.

Leave a space about three fingers wide, marked with pins, which you will NOT SEW!!! You'll need this space to stuff Tubey. I like to back-and-forth with the machine on either side of the stuffing-hole, so his bottom seam doesn't start to pop out while I'm stuffing him.

Need stuffing!!!!